10 kW

A perfect windmill in size covering energy for most Households. It provides good ratio of price / power generated giving you a faster repayment of your investment.

Short on Plane

You can choose from Several towers at heights between 12 and 16 meters tower height. The wingspan is 8 meters. The mast shipped in sections and is very easy to install, it is available bothering as standalone and Hydraultorn. The flat generatesHTML power in three phases or call phased in to your network. There is a hydraulic pump in the generator housing That exercise control tower, tower braking and dynamic braking.

New switchgear cabinet solve overproduction.

We have received many inquiries on Whether We Can redirect energy to the electric immersion heater or air heater, now we control box That Solves IT, Which Briefly That means you can avoid giving away the excess energy Currently That goes online. We have developed a small control box That You Can Easily install in order to use the energy Those days to have a high production. Of course down the Requirement to have any type of heat source where you can take care of this surplus. Perhaps an air heater to heat the garage or an immersion heater to heat Their hot water?

Computerized

All our wind turbines from 10-30kW controlled by one of us developed the PLC application. There are sensors for wind speed, wind direction, speed, turret rotation angle, Amp, voltage, torque and power generated mm. The safety and optimal energy absorption capacity has been guiding principles When Developing software on the computer. If problems Occur, for example, the wind sensor breaks close the plant or Call by itself and the warning light starts flashing. You can then read the error code on the computer screen and quickly see what is wrong. Our works are programmed with the help of a "real-time power meters" Always try to be as much in the wind, the rated power is Reached.This allows the plant is trying to Achieve the maximum power output of up to 22m / s.

Electronic converters

Sunshinepro work Comes With ABB converters leaving power in three phases. The converters contain '' an intelligent softwarethat or call phases in the generated power to the grid. You connect the power cable from your wind turbine on your side of the meter leading to your house consumes electricity from your wind turbines in the first place, and if the energy is not enough to ask the rest of the grid.

Easy to assemble

In principle, it is quite easy to install its own wind turbines. It is required That you found the concrete foundation:: According anvinsingarna. The assembly can handle any handy person at any time, but the connection to the electricity grid requires a qualified elektriker.Vingarna mounted on the center of the rotor and the generator housing bolted to the tower.

What the delivery includes

• generator housing Stainless (White lacquered) • rotor center (White lacquered) • rotor blade (Glass fiber) • nose cone (White 5mm plastic) • Wind speed sensor (non-contact encoder IP67) • Wind direction sensor (non-contact magnetic angle sensor IP67) • Electric cables from the generator to the switchgear cabinet (Machine Screened) • Position to switchgear cabinet (hot-galvanized) • switchgear cabinet containing all the electronics (Ugnslackad) • dump loads (Stainless Steel) • etc ... .

What is not included

Tower or the attachment for the wind turbine to be ordered separately According To The Needs That You Have. In addition to construction work and materials required for it so does not include the power cord from the wind turbine switch cabinet and your cabinets - this must be ordered separately in the Desired length. You Need access to common tools such as screwdrivers, wrenches, etc. You also have to seek the permission of your electricity Distributors and arranging a building laid fromyour Municipality.

Delivery

The delivery time is about 15-18 weeks from the start of production. When writing the contract will pay you 50% of the purchase price, the remaining 50% paid before shipment from Sunshinepro. Of course, you can custom-made mast mounts are supplied before the final delivery of the order to prepare to quickly get up your wind turbine.

Operation, maintenance

All Sunshinepro turbines are designed So THAT a minimum of maintenance required. Examples of things You should do with regularity, for example, visual inspection of the wing blades So THAT They have suffered external damage and check the cables' tension. Tower comes in hot-dip galvanized steel. You can choose to paint the tower in such a white, but you will then naturally get a little more maintenance. It is Important That you Consider That not all the paint adheres to a galvanized surface - talk with your paint dealer! As a customer of Windon you get throughout your facility's lifetime access to free software updates to the computer zoom stryrskåpet and Software in your converter (postage may apply)